Assessment Validation Made Simple: Guide to Validating Assessments
Assessment Validation Made Simple: Guide to Validating Assessments
Blog Article
Upon receiving registration, RTOs must manage various responsibilities like annual declarations, AVETMISS reporting, and marketing compliance, with validation being a notably arduous task.
Despite our extensive coverage on validation, let's re-examine the term. ASQA states that validation is a quality check of the assessment process.
Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.
Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.
As per the standards, two kinds of validation are required.
The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.
The second validation ensures assessments are conducted according to the principles of assessment and rules of evidence.
Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.
An Overview of the Two Types of Assessment Validation
Exploring the Concept of Assessment Validation
As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, known as pre-assessment validation, pertains to the first part of the clause, focusing on meeting all unit requirements and ensuring total workbook compliance.
On the implementation side, post-assessment validation ensures Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
This article will focus on assessment tool validation.
The Process of Assessment Tool Validation
Now that we’ve differentiated the two types of validation, let’s examine assessment tool validation in detail.
Timing for Conducting Assessment Tool Validation
The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Hence, whenever new learning resources are bought, assessment tool validation should be carried out before students use them.
You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.
However, this isn't the only time to perform this type of validation. Conduct assessment tool validation also when you:
- resources get updated
- new training products are added to your scope
- review your course against training product updates
- learning resources are identified by you as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based approach to regulation means RTOs must conduct regular risk assessments. Complaints from students about learning resources signal the need for assessment tool validation.
Determining Training Products for Validation
Keep in mind, this validation ensures compliance of all learning resources before use. All RTOs must validate resources for each unit.
Starting Assessment Tool Validation: What You Need
Teaching Materials
To validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – the initial document to investigate. It identifies which assessment items address unit requirements, helping speed up validation.
Learner/student workbook – check its suitability as an assessment tool during validation. Ensure instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.
Validation Team
Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.
As a group, your validation panel must possess:
Vocational competencies and current industry skills that relate to the unit being validated
Up-to-date knowledge and skills in vocational teaching and learning
Either one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or its updated version
Validation website instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool helps in both the validation process and documentation. It facilitates seeing how each assessment item matches each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Simultaneously, it can serve as proof that you have validated your resources before they are used by students.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are accessible online. These tools typically have validators examine the tools in their entirety to determine if they meet the principles of assessment.
Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
It is advisable to use a more detailed template to inspect each unit requirement and its corresponding assessment items. Below is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Check?
As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.
Essential Principles of Assessment
Fairness – Is equal opportunity and access provided to everyone in the assessment process?
Flexibility – Are different options provided in the assessment to demonstrate competence based on individual needs and preferences?
Validity – Does the assessment assess what it is intended to assess? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment yield the same results each time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?
Evidence Key Rules
Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool prove that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To avoid employing learning resources that fail to meet all unit requirements, be sure to follow these guidelines:
Walk the Talk
Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Perform each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:
nappying
prepare bottles, bottle-feed babies and sanitize equipment
solid food preparation and feeding babies
respond to baby signs and cues suitably
settle babies for sleep and prepare them
monitor and support age-appropriate physical exploration and gross motor skills
Having students explain changing nappies for babies under 12 months old doesn’t directly address the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be carrying out the tasks.
Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
Complete Compliance or Not Competent
Mind the lists. Again, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be More Specific
Every assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions do not confuse students or assessors. For example:
What kind of information can be included in a work package?
What details can be included in a work package?
The answer may include:
Compulsory resources
Applicable costs
Activity timeframe
Assigned functions and responsibilities
If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.
This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:
Name a hazard and/or environmental issue in the workplace and choose the most effective hazard control hierarchy.
Answers might include, but are not limited to:
Weather conditions – work area isolation, engineering, PPE
Work area and ground conditions – eliminating hazards, isolation, engineering
People – isolating, use of engineering controls, administrative controls
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolation, use of engineering controls, administration
Equipment or machinery – isolation, engineering controls, administration
Avoiding double-barrelled questions makes it simpler for students to answer and for assessors to accurately judge student competence.
Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” However, with such guarantees, you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.